Orbit

徐 文祥
姓名 徐 文祥
電子郵件 whsu@mail.nctu.edu.tw
聯絡電話 886-3-5712121 ext. 55111
個人網址 http://www.me.nctu.edu.tw/whsulab/
年度 論文名稱
2015 Yen, H.-C., Hsu, W., Huang, J.-M., and Lu, C.-W., Development of a High Efficiency In-Line Tube Fan Using CFD, International Journal of Turbo and Jet Engines, 32, pp105-115
2014 Wong, T.-H., Chung, T.-K., Liu, T.-W., Chu, H.-J., Hsu, W., Yeh, P.-C., Lee, C.-C., Lee, M.-S., and Yang, Y.-S., Electromagnetic/Magnetic-Coupled Targeting System for Screw-Hole Locating in Intramedullary Interlocking-Nail Surgery, IEEE Sensors Journal, 14, 12, pp4402-4410
2014 Wu, S.-Y., Hung, C.-Y., and Hsu, W., A wirelessly readable and resettable shock recorder through the integration of LC circuits and MEMS devices, Smart Materials and Structures, 23, pp095030-
2014 Huang, Y.-T., Chen, H.-L., and Hsu, W., An Analytical Model for Calculating the Pull-in Voltage of Micro Cantilever Beams Subjected to Tilted and Curled Effects, Microelectronic Engineering, 125, pp73-77
2014 Wu, S.-Y. and Hsu, W., Wireless EWOD/DEP chips powered and controlled through LC circuits and frequency modulation, Lab on a Chip, 14, pp3101-3109
2014 Huang, Y.-T and Hsu, W., Fabricating embedded SU-8 microstructures with asymmetric inside cross section by double-side multiple partial exposure method, Microelectronic Engineering, 121, pp64-67
2014 Huang, Y.-T. and Hsu, W., A Simulation Model on Photoresist SU-8 Thickness after Development under Partial Exposure with Reflection Effect, Japanese Journal of Applied Physics, 53, pp036505-
2014 Yen, H.-C., Hsu, W. and Lin, S.-C., Performance enhancement of the in-line fan equipped with the guiding vane and the tail body, Journal of Advances in Mechanical Engineering, 2014, pp817637-
2013 Lin, Y.-H., Chang, Y.-F., Meng, H.-F., Zan, H.-W., Hsu, W., and Chen, C.-H., Soldering of solution-processed organic vertical transistor and lightemitting diode on separate glass substrates by tin micro-balls, Organic Electronics, 14, pp3052-3060
2013 Wu, S.-Y. and Hsu, W., Design and characterization of LC strain sensors with novel inductor for sensitivity enhancement, Smart Materials and Structures, 22, 10, pp105015-
2012 Lee, Y.-C., Li, M.-H., Cheng, Y.-T., Hsu, W., and Li, S.-S., Electroplated Ni-CNT Nanocomposite for Micromechanical Resonator Applications, IEEE Electron Device Letters, 33, pp872-874
2012 Lin, Y.-H. and Hsu, W., Polymer as the protecting passivation layer in fabricating suspended SCS structures at both anisotropic and isotropic etching, Journal of Micromechanics and Microengineering, 22, pp045015-
2012 Lee, Y.-C., Cheng, Y.-T. and Hsu, W., Stress Gradient Modification of the Electroplated Ni-Diamond Nanocomposite for MEMS Fabrication, Journal of The Electrochemical Society, 159, 5, pp460-466
2011 Chen, S., Chang, C., and Hsu, W., Improved model of rectangular scratch drive actuator, The Journal of Micro/Nanolithography, MEMS, and MOEMS, 10, 1, pp013016-
2011 Fan, S.-K., Yang, H., and Hsu, W., Droplet-on-a-Wristband: Chip-to-Chip Digital Microfluidic Interfaces between Replaceable and Flexible Electrowetting Modules, Lab on a Chip, 11, pp343-347
2010 Wu, C.H., Hsu, W., Fan, K.W., Lin, Y.L., and Lin Y.C., Optimization of an optical disk manufacturing process for polymer microfluidic substrates by using the design of experiment methodology, Journal of Micro/Nanolithography, MEMS, and MOEMS,, 9, 3, pp031011-, (SCI)
2010 Yang, C.-Y., Cheng, Y.-T. and Hsu, W., The Investigation of Nano-Roughening Effect on the Reliability Enhancement of Adhesive Bond for NEMS Manufacture Application, IEEE Transactions on Advanced Packaging, 33, 2, pp356-361
2010 Chen, S., Chang, C., and Hsu, W., Output Force Enhancement of Scratch Drive Actuator in Low-Voltage Region by Using Flexible Joint, Sensors and Transducers, 115, 4, pp71-82
2009 Chang, C.-W. and Hsu, W., Three-dimensional micro assembly of a hinged nickel micro device by magnetic lifting and micro resistance welding, Journal of Micromechanics and Microengineering, 19, pp025001-
2009 Huang, C.-S., Cheng, Y.-T., Chung, J., and Hsu, W., Investigation of Ni-based Thermal Bimaterial Structure for Sensor and Actuator Application, Sensors and Actuators :A, 149, pp298-304
2009 Chang, C.-W., Yeh, C.-C., and Hsu, W., Experimental investigations and characterization of micro resistance welding with an electro-thermal actuator, Journal of Micromechanics and Microengineering, 19, pp025001-
2008 Cheng, P.L., Liao, C.I., Chien, C.C., Yang, C.L., Ting, S.F., Jeng, L.S., Huang, C.T., Cheng, Osbert, Tzou, S.F., and Hsu, W., Effectiveness of Si thin buffer layer for selective SiGe epitaxial growth in recessed source and drain for pMOS, Materials Chemistry and Physics, 107, 2-3, pp471-475
2008 Chung, J.W. and Hsu, W., Fabrication of a polymer-based torsional vertical comb drive using a double-side partial exposure method, Journal of Micromechanics and Microengineering, 18, pp035014-
2007 Wu, C.-H., Chen, C.-H., Fan, K.-W., Hsu, W. and Lin, Y.-C., Design and fabrication of polymer microfludic substrates using the optical disc process, Sensors and Actuators: A, 139, 1-2, pp310-317
2007 Chung, J. and Hsu, W., Enhancement on forming complex three dimensional microstructures by a double-side multiple partial exposure method, Journal of Vacuum Science and Technology B, and selected in the Virtual Journal of Nanoscale Science & Technology, October Issue, 2007, 25, pp1671-1678
2007 Fan, S.-K., Yang, H., Wang, T.-T., and Hsu, W., Asymmetric Electrowetting - Moving Droplets by a Square Wave, Lab on a Chip, 7, pp1330-1335
2006 Cheng, P.L., Liao, C.I., Wu, H.R., Chen, Y.C., Chien, C.C., Yang, C.L., Tzou, S.F., Tang, J., Kodali, R., Washington, L., Cho, Y., Chang, V.C., Fu, T., and Hsu, W., Effective surface treatments for selective epitaxial SiGe growth in locally strained pMOSFETs, Semiconductor Science and Technology, 22, pp140-143
年度 論文名稱
2015 Liu, C.-H., Chang, K.-W., Chang, P.-Y., Sung, Y.-J., Huang, H.-Y., Yao, D.-J., Fan, S.-K., Hsu, W., and Li, C.-J., Embryo lab chip taking advantage of microfluidics and cell co-culturing, IEEE Transducers 2015, Alaska, USA
2015 Yang, C., Wu, S.-Y., Glick, C., Choi, Y., Hsu, W., and Lin, L., 3D Printed RF Passive Components by Liquid Metal Filling, IEEE MEMS 2015, Estoril, Portugal
2012 Chuo, T.-M., Shih, P.-H., Hsu, W., Huang, C.-Y., Huang, Y.-S., Chen, Y.-T., and Fan, S.-K., Signal Enhancement by Particle Concentration Using Dielectrophoresis in an Electrowetting-driven Droplet, IEEE NANOMED 2012, Bangkok, Thailand
2011 Huang, C.-Y., Fan, S.-K. and Hsu, W., Capillary Electrophoresis in Virtual Microchannel Based on DIelectrohoresis, MicroTAS 2011, Seattle, USA
2011 Chung, C.H., Ma, R.-P., Shieh, Y.-C., and Hsu, W., A Robust Micro Mechanical-latch Shock Switch with Low Contact Resistance, IEEE Transducers 2011, Beijing, China
2011 Lee, Y.-C., Cheng, Y. T. and Hsu, W., Electroplating Process of NiCNTs Nanocomposite for MEMS Resonator Fabrication, IEEE MEMS 2011, Cancun, Mexico
2009 Huang, C.-S., Cheng, Y.-T., Yeh, C.-J., Liu, H.-K. and Hsu, W., Young’s modulus and fatigue lifetime improvements by diamond size effect on electroplated Ni-diamond nanocomposite, IEEE Transducers 2009, Denver, USA
2008 Chung, J., Lee, Y.-C. and Hsu, W., Fabrication of polymer-based vertical comb drive using a double-side multiple partial exposure method, IEEE MEMS 2008, Tucson, USA
2008 Yang, H., Hsu, W. and Fan, S.-K., Wristand-like droplet platform by digital microfluidic modulation, IEEE MEMS 2008, Tucson, USA
2005 Yang, H., Fan, S.-K. and Hsu, W., 3D Droplet Transportation by EWOD Actuations on Flexible Polymer Films, ASME IMECE 2005, Orlando, USA
年度 計畫名稱 參與人 職稱/擔任之工作 計畫期間 補助/委託或合作機構
2014 高深寬比乾式離子蝕刻尖角及凹角結構蝕刻補償技術應用於微光柵分光元件之研究 徐文祥 科技部
2013 核酸檢測系統晶片開發 徐文祥 Panasonic株式會社
2012 節能型智慧無線監控系統平臺建構與其在土木結構診斷應用之研究-總計畫暨子計畫:應用智能材料以微機電技術開發土木結構無線監測模組之獵能器與被動式無線感測器之研究 徐文祥 科技部
2012 骨髓內釘固定孔之磁力式定位裝置改進與鑽孔測試 徐文祥 台大醫院新竹分院
2011 以高分子作為感應偶合電漿反應離子蝕刻側壁保護層以製作單晶矽懸浮微結構之快速製程平台研發 徐文祥 行政院國家科學委員會
2011 學研合作計畫-微流體生殖醫學-仿生、檢測與組織工程 徐文祥 科技部
2011 以創新多頭奈米原子力探針顯微術分析鑲在仿生非對稱雙層脂膜上之質子傳送焦磷酸水解鋂的即時動態特性-以油包覆之水膠液滴製備膜蛋白嵌合之仿生非對稱雙層脂膜(子計畫三) 徐文祥 科技部
2011 重力驅動之電子式靜脈輸液裝置的開發 徐文祥 署立新竹醫院
2010 高G值碰炸開關的研發 徐文祥 中山科學研究院系統發展中心
2010 多晶矽微慣性感測器的開發 徐文祥 力智電子股份有限公司與台灣晶技股份有限公司
2009 單晶片多晶矽電容式微加速度計 徐文祥 行政院國家科學委員會
2008 以電鍍法製作含奈米粒子之金屬微結構的熱膨脹係數及疲勞特性研究 徐文祥 行政院國家科學委員會
2008 以光感高分子材料製作垂直梳狀致動器 徐文祥 行政院國家科學委員會
2006 以微致動器進行微電阻焊在立體微元件組裝的研究 徐文祥 行政院國家科學委員會
2005 含奈米粒子之金屬微元件的製程及機械特性研究 徐文祥 行政院國家科學委員會
2004 新型高效率微致動器及其應用在微機電系統之研究 徐文祥 行政院國家科學委員會與加拿大國家研究委員會
國家 學校名稱 系所 學位 期間
美國 加州大學柏克萊分校 機械 博士 1989.12 ~ 1992.05
美國 加州大學柏克萊分校 機械 碩士 1987.08 ~ 1989.12
台灣 國立交通大學 機械工程 學士 1981.09 ~ 1985.06
服務機關名稱 單位 職務
國立交通大學 國際半導體產業學院 合聘教授
國立交通大學 國際事務處 國際事務長
國立交通大學 機械工程學系 系主任
國立交通大學 機械工程學系 副系主任
國立交通大學 機械工程學系 教授
國立交通大學 秘書室對外事務組 組長
國立交通大學 機械工程學系 副教授
台灣福特汽車 製造處引擎廠 工程師
加州大學柏克萊分校 機械工程系所 研究助理
陸軍軍官學校 機械工程系 教官